Power station comparison

Anker Solix C300 vs Goal Zero Yeti 300 Comparison

Yeti 300 is the stronger overall choice. It accepts 200W of solar versus 100W, allowing faster off-grid recovery in good conditions. Solix C300 is 5 lb lighter than the alternative, making it easier to carry and move.

The verdict

Yeti 300 leads this comparison

Yeti 300 finishes with a Matchup Rating of 74/100, compared with 69/100 for the next-highest model. Solix C300 remains worth considering when lower carrying weight is more important for your use case. The category results below show how consistently that advantage holds and where the alternatives still win.

Fast, transparent comparison

At a Glance

Use this as the quick numerical view. A Best label marks the stronger value, but not every win carries the same buying weight; the analysis below explains which gaps are large enough to matter.

Specification Anker Solix C300 Portable Power Station Anker Solix C300 Goal Zero Yeti 300 Portable Power Station Goal Zero Yeti 300
Matchup Rating 69/100 74/100 Best overall
Battery Capacity 288 Wh 297 Wh Best
Continuous Inverter 300 W 350 W Best
Maximum AC Input 330 W 420 W Best
Estimated AC Recharge 1 hour 0.80 hours
Maximum Solar Input 100 W 200 W Best
Estimated Solar Recharge 3.50 hours 1.80 hours Best
Warranty 5 years 5 years
Weight 9.10 lb Best 14.10 lb
Retailer Options

Expert buying analysis

Strengths & Tradeoffs

These are the advantages and compromises most likely to affect what each station can do in real use, rather than a simple count of specification wins.

Anker Solix C300 Portable Power Station

Anker Solix C300

Strengths

  • Fast backup transfer: 10ms
  • 3 USB-C ports

Tradeoffs

  • Lower solar input: 100 W
  • Lower continuous output: 300 W
Goal Zero Yeti 300 Portable Power Station

Goal Zero Yeti 300

Strengths

  • Strong solar input: 200 W
  • Strong continuous output: 350 W

Tradeoffs

  • Slower backup transfer: 20ms
  • Only 2 USB-C ports

Where each model wins

Category Results

Category scores group related specifications. The notes below explain why each score moved and how much that category should influence the buying decision.

Performance & Capacity

Anker Solix C300 72/100 Goal Zero Yeti 300 74/100
Category leader

Goal Zero Yeti 300 leads here with higher continuous output (350 W) and higher cycle life (4,000 cycles).

Goal Zero Yeti 300 Portable Power Station
Goal Zero Yeti 300
Trails in This Category
Anker Solix C300 Portable Power Station

Anker Solix C300 trails here primarily because of lower continuous output (300 W).

Buying impact

Yeti 300 leads the next-highest model by only 2 points, so treat this as a slight edge rather than a major capability gap. Give this category extra weight when runtime, sustained appliance power, battery expansion, or long-term ownership are your priorities.

AC & Solar Charging Speeds

Anker Solix C300 75/100 Goal Zero Yeti 300 95/100
Category leader

Goal Zero Yeti 300 leads here with higher solar input (200 W) and faster solar recharge (1.80 hours).

Goal Zero Yeti 300 Portable Power Station
Goal Zero Yeti 300
Trails in This Category
Anker Solix C300 Portable Power Station

Anker Solix C300 trails here primarily because of lower solar input (100 W).

Buying impact

Yeti 300 leads the next-highest model by 20 points here, large enough to matter if this category matches your main use case. It matters most if you cycle the battery often, rely on solar between outages, or need short turnaround between uses.

Outlets, Ports & Connectivity

Anker Solix C300 59/100 Goal Zero Yeti 300 58/100
Category leader

Anker Solix C300 leads here with 3 USB-C ports and 3 120V AC outlets.

Anker Solix C300 Portable Power Station
Anker Solix C300
Trails in This Category
Goal Zero Yeti 300 Portable Power Station

Goal Zero Yeti 300 trails here primarily because it has only 2 USB-C ports.

Buying impact

Solix C300 leads the next-highest model by only 1 point, so treat this as a slight edge rather than a major capability gap. Use it mainly as a fit check: 240V capability and the specific ports your equipment needs matter more than the raw number of outlets.

Portability & Size

Anker Solix C300 55/100 Goal Zero Yeti 300 36/100
Category leader

Anker Solix C300 leads here with lower weight (9.10 lb) and smaller overall size (389.03 cu in).

Anker Solix C300 Portable Power Station
Anker Solix C300
Trails in This Category
Goal Zero Yeti 300 Portable Power Station

Goal Zero Yeti 300 trails here primarily because of higher weight (14.10 lb).

Buying impact

Solix C300 leads the next-highest model by 19 points here, large enough to matter if this category matches your main use case. Portability matters most for frequent carrying, vehicle use, and tight storage; a mostly stationary backup system can usually give it less weight.

Analysis & specifications

Performance & Capacity

Battery storage, continuous output, service life, and backup-power capability determine how much useful work a power station can support.

Expert analysis

Solix C300 and Yeti 300 are relatively close on the high-value performance specifications we use for buying decisions. That makes smaller differences in charging, portability, and feature fit more important than a minor overall score edge.

Battery Capacity

Anker Solix C300 288 Wh
Goal Zero Yeti 300 297 Wh Best

Stored energy available for running devices and appliances.

Continuous Inverter Power

Anker Solix C300 300 W
Goal Zero Yeti 300 350 W Best

Sustained AC output, which is the meaningful figure for ordinary appliance loads.

Advertised Peak Output

Not scored
Anker Solix C300 600 W
Goal Zero Yeti 300 600 W

Shown for reference only. Peak claims are not included in Solar Waypoint ratings because they do not reliably describe sustained usable output.

Warranty

Anker Solix C300 5 years
Goal Zero Yeti 300 5 years

Manufacturer warranty coverage for the power station.

Battery Cycles

Anker Solix C300 3,000 cycles
Goal Zero Yeti 300 4,000 cycles Best

Published cycle-life figure for long-term battery durability.

Battery Chemistry

Anker Solix C300 LiFePO4 (LFP)
Goal Zero Yeti 300 LiFePO4 (LFP)

Battery chemistry affects expected cycle life, weight, and thermal stability.

UPS / EPS Transfer Time

Anker Solix C300 10ms Best
Goal Zero Yeti 300 20ms

How quickly backup power takes over when grid power is interrupted.

Analysis & specifications

AC & Solar Charging Speeds

Input limits and estimated recharge times show how quickly each battery can be restored from the wall or from solar panels.

Expert analysis

Yeti 300 accepts up to 200W of solar versus 100W for Solix C300. That gap can materially shorten daytime recovery when you have enough panel capacity and good sun. Yeti 300 has an estimated AC recharge time of 48 minutes versus 1 hour for Solix C300, a useful advantage when you need quick turnaround between outages or trips.

Maximum AC Input

Anker Solix C300 330 W
Goal Zero Yeti 300 420 W Best

Maximum published charging input from an AC wall source.

Estimated AC Recharge

Anker Solix C300 1 hour
Goal Zero Yeti 300 0.80 hours

Estimated time to recharge from AC; lower is better.

Maximum Solar Input

Anker Solix C300 100 W
Goal Zero Yeti 300 200 W Best

Maximum solar input accepted by the base power station.

Estimated Solar Recharge

Anker Solix C300 3.50 hours
Goal Zero Yeti 300 1.80 hours Best

Estimated best-case solar recharge time; lower is better.

Analysis & specifications

Outlets, Ports & Connectivity

The outlet mix determines how many devices can be powered directly and how often the less-efficient AC inverter is needed.

Expert analysis

Solix C300 and Yeti 300 are close on the connectivity features that usually affect a purchase. Treat this section as a compatibility check: 240V support and the exact ports your devices need matter more than simply having the highest total port count.

120V AC Outlets

Anker Solix C300 3 Best
Goal Zero Yeti 300 2

Standard household AC outlets.

USB-A Ports

Anker Solix C300 1
Goal Zero Yeti 300 2 Best

Direct charging ports for common USB devices.

USB-C Ports

Anker Solix C300 3 Best
Goal Zero Yeti 300 2

Direct charging for modern phones, tablets, laptops, and other USB-C equipment.

Low-Amp DC Ports

Anker Solix C300 0
Goal Zero Yeti 300 1 Best

Direct-current outputs for lights, routers, CPAP equipment, and similar devices.

12V Accessory Sockets

Anker Solix C300 1
Goal Zero Yeti 300 1

Automotive-style sockets for portable refrigerators and other 12V accessories.

App Connectivity

Anker Solix C300 WiFi, Bluetooth
Goal Zero Yeti 300 WiFi

Remote monitoring and controls available through the product app or supported connection.

Analysis & specifications

Portability & Size

Weight and overall size show how easily a unit can be carried, stored, and fitted into a vehicle or backup-power setup.

Expert analysis

Solix C300 is 5 lb lighter than Yeti 300. That is meaningful if you move the station regularly, but much less important for mostly stationary home backup. It is also about 34% smaller by calculated exterior volume than Yeti 300, reinforcing its advantage for vehicles and tight storage.

Weight

Anker Solix C300 9.10 lb Best
Goal Zero Yeti 300 14.10 lb

Published product weight; lower is easier to move.

Physical Volume

Anker Solix C300 389.03 cu in Best
Goal Zero Yeti 300 591.67 cu in

Calculated from the published exterior dimensions; lower takes less storage space.

Dimensions

Not scored
Anker Solix C300 6.5 × 6.3 × 9.5 in
Goal Zero Yeti 300 11.3 × 7.7 × 6.8 in

Published length, width, and height in inches.

View Full Specifications

Review the complete published specifications, or learn how to interpret power-station specifications.

Specification Anker Solix C300 Goal Zero Yeti 300
Battery & Power
Battery Capacity 288 Wh 297 Wh
Continuous Inverter Power 300 W 350 W
Advertised Peak Output 600 W 600 W
Warranty 5 years 5 years
Battery Cycles 3,000 cycles 4,000 cycles
Battery Chemistry LiFePO4 (LFP) LiFePO4 (LFP)
UPS / EPS Transfer Time 10ms 20ms
AC & Solar Charging
Maximum AC Input 330 W 420 W
Estimated AC Recharge 1 hour 0.80 hours
Maximum Solar Input 100 W 200 W
Estimated Solar Recharge 3.50 hours 1.80 hours
Solar Input 1
Maximum Watts 100 W 200 W
Voltage Range 11–28 V 12.3–28 V
Maximum Current 8.20 A 10 A
Connector XT60/XT60i DC7909
Outlets, Ports & Connectivity
120V AC Outlets 3 2
USB-A Ports 1 2
USB-C Ports 3 2
Low-Amp DC Ports 0 1
12V Accessory Sockets 1 1
App Connectivity WiFi, Bluetooth WiFi
Physical, Support & Resources
Weight 9.10 lb 14.10 lb
Weight (Metric) 4.10 kg 6.40 kg
Physical Volume 389.03 cu in 591.67 cu in
Dimensions 6.5 × 6.3 × 9.5 in 11.3 × 7.7 × 6.8 in
Dimensions (Metric) 164 × 161 × 240 mm 288 × 196 × 172 mm
User Manual Open manual Open manual

Why this comparison is trustworthy

Experience Behind the Ratings

Our team combines many years of solar experience with practical knowledge of portable power, custom battery systems, off-grid design, and the products currently competing for your money.

Real solar and off-grid experience

Our team has worked with power stations since some of the earliest models, along with custom battery, solar, and off-grid system design and builds. We understand what specifications mean once equipment leaves the product page and has to power real loads.

A practical view of the current market

We continually follow new products, changing capabilities, useful features, and common marketing claims. That helps our team recognize what creates real value, what limits a system, and how buyers can make the most of it.

How we turn specifications into useful advice

Solar Waypoint tracks detailed specifications covering battery storage, continuous output, AC and solar charging, battery longevity, outlets, connectivity, and physical design. We standardize those figures so products are evaluated consistently while keeping the specifications visible so readers can see what drives each result.

Matchup Ratings use the capability class represented by the selected products. Larger batteries and stronger continuous inverters receive appropriate credit, while the category results show exactly where each product wins or trails.

More About Our Team

Our experience covers portable power stations, solar charging, custom battery banks, electrical load planning, and complete off-grid system design and builds. That background helps us distinguish a specification that sounds impressive from one that meaningfully improves runtime, charging, reliability, or day-to-day usability.

Power-station expertise begins with the job the system must perform. An experienced team looks beyond a single watt or watt-hour number and considers running loads, startup demands, duty cycles, conversion losses, charging opportunities, storage conditions, and how often the equipment must be moved.

Load and runtime planning

We understand the difference between stored battery energy, usable AC energy, continuous inverter output, and short starting demands. That makes it easier to judge whether a unit is suited to electronics, refrigeration, medical equipment, tools, RV loads, or home-backup essentials—and how long it can reasonably support them.

Charging-system knowledge

A large battery is far less useful when it cannot be replenished in time. We examine AC charging in relation to battery size and evaluate solar watts together with voltage, current, connector, and controller limits. Those details determine which arrays are compatible and how practical off-grid charging will be.

Battery and electrical experience

Battery chemistry, cycle-life claims, warranty coverage, inverter design, outlet types, 120V or 240V capability, DC connections, and backup transfer behavior all affect the way a system can be used. We treat those specifications as parts of one electrical system rather than isolated marketing features.

Selection for real use

The best option changes with the setting. Camping, vehicle travel, job-site use, emergency backup, and expandable home systems place different demands on weight, charging, output, outlets, and accessories. We organize the comparison around those practical tradeoffs.

We also follow product generations, manuals, changing capabilities, accessory ecosystems, and common marketing claims across the market. The goal is not to repeat a product page. It is to explain what the specifications mean together, identify limitations before they become expensive surprises, and help readers choose a system that fits both their present needs and realistic plans for expansion.

Detailed Rating Methodology

Our rating system is designed to answer three practical questions: how much useful work a power station can perform, how effectively it can be recharged, and how convenient it is to connect, move, and live with. The groups are intentionally weighted differently because they do not contribute equally to the core job of providing dependable power.

Performance & Capacity Greatest influence

Storage, continuous output, battery longevity, warranty, and system capability determine which loads the unit can support and for how long.

AC & Solar Charging Major supporting influence

Charging power and estimated recharge time show whether the battery can be restored quickly enough from the wall, solar panels, or a larger system.

Outlets & Connectivity Major supporting influence

The right AC, USB, and DC connections determine whether stored energy can reach the equipment that needs it without unnecessary adapters or conversion losses.

Portability & Size Smaller, use-case influence

Weight and physical size matter, but they are judged in class context so larger batteries are not unfairly penalized simply for containing more hardware.

Why the groups are weighted this way

Performance and capacity receive the most influence because they establish the basic limit of the system: the appliances it can run, the runtime it can provide, and the durability expected from the battery. A light, well-connected product cannot compensate for being unable to support the required load.

Charging and connectivity provide much of the remaining influence. Charging matters because stored energy must be replaced on a useful schedule, especially during outages or off-grid use. Outlets and connectivity matter because power must be delivered in the correct form. Portability remains meaningful, but it carries less influence because every increase in battery capacity and inverter capability normally adds weight and volume.

Peer Ratings compare each model with appropriate standards for its capability class. Matchup Ratings apply the same rating framework to the products selected for a direct comparison. This keeps compact products useful within their intended role while still recognizing the additional capability of larger systems.

  • Continuous output matters. Advertised peak output is shown for reference but receives no rating weight because it does not reliably represent sustained appliance capability.
  • Charging is judged in context. Input wattage is considered together with battery size and estimated recharge time, while solar evaluation also accounts for the limits that determine compatible panel configurations.
  • Useful connections matter more than a long feature list. Common outlets establish everyday flexibility, while specialized 240V, high-amp DC, expansion, and system-level features become important when they change what the compared products can actually do.
  • Class context keeps comparisons fair. Products are measured against realistic expectations for their capability range instead of rewarding size alone or expecting a compact unit to behave like a home-backup system.
  • The evidence stays visible. Category results, strengths and tradeoffs, and the full specification table let readers verify what drives the result.

Ready to choose?

Retailer Options

Build your own matchup

Compare the Models That Matter to You

Choose one model to open its expert analysis, or select two to four models for a complete specification and rating comparison.

Explore the full directory
Build Your Comparison
Best: Goal Zero Yeti 300