Power station comparison

Bluetti Elite 100 V2 vs Goal Zero Yeti 1000X Comparison

Elite 100 V2 is the stronger overall choice. It accepts 1,000W of solar versus 600W, allowing faster off-grid recovery in good conditions. Yeti 1000X supports up to 2,197Wh of total battery capacity versus 1,024Wh, leaving more room for extended backup.

The verdict

Elite 100 V2 leads this comparison

Elite 100 V2 finishes with a Matchup Rating of 78/100, compared with 54/100 for the next-highest model. Yeti 1000X remains worth considering when maximum system capacity is more important for your use case. The category results below show how consistently that advantage holds and where the alternatives still win.

Bluetti Elite 100 V2 Portable Power Station
Bluetti Elite 100 V2
Shop at Bluetti Shop on Amazon Use code travels for 5% off

Fast, transparent comparison

At a Glance

Use this as the quick numerical view. A Best label marks the stronger value, but not every win carries the same buying weight; the analysis below explains which gaps are large enough to matter.

Specification Bluetti Elite 100 V2 Portable Power Station Bluetti Elite 100 V2 Goal Zero Yeti 1000X Portable Power Station Goal Zero Yeti 1000X
Matchup Rating 78/100 Best overall 54/100
Battery Capacity 1,024 Wh Best 997 Wh
Continuous Inverter 1,800 W Best 1,500 W
Maximum AC Input 1,200 W Best 600 W
Estimated AC Recharge 1 hour Best 2 hours
Maximum Solar Input 1,000 W Best 600 W
Estimated Solar Recharge 1.20 hours 2 hours
Warranty 5 years Best 2 years
Weight 25 lb Best 31.70 lb
Retailer Options
Shop at Bluetti Shop on Amazon Use code travels for 5% off

Expert buying analysis

Strengths & Tradeoffs

These are the advantages and compromises most likely to affect what each station can do in real use, rather than a simple count of specification wins.

Bluetti Elite 100 V2 Portable Power Station

Bluetti Elite 100 V2

Strengths

  • Fast backup transfer: 10ms
  • Long warranty: 5 years

Tradeoffs

  • Battery capacity is not expandable
Goal Zero Yeti 1000X Portable Power Station

Goal Zero Yeti 1000X

Strengths

  • Strong expansion potential: 2,197 Wh

Tradeoffs

  • Slower backup transfer: None
  • Shorter warranty: 2 years

Where each model wins

Category Results

Category scores group related specifications. The notes below explain why each score moved and how much that category should influence the buying decision.

Performance & Capacity

Bluetti Elite 100 V2 75/100 Goal Zero Yeti 1000X 53/100
Category leader

Bluetti Elite 100 V2 leads here with faster backup transfer (10ms) and longer warranty coverage (5 years).

Bluetti Elite 100 V2 Portable Power Station
Bluetti Elite 100 V2
Trails in This Category
Goal Zero Yeti 1000X Portable Power Station

Goal Zero Yeti 1000X trails here primarily because of slower backup transfer (None).

Buying impact

Elite 100 V2 leads the next-highest model by 22 points here, large enough to matter if this category matches your main use case. Give this category extra weight when runtime, sustained appliance power, battery expansion, or long-term ownership are your priorities.

AC & Solar Charging Speeds

Bluetti Elite 100 V2 95/100 Goal Zero Yeti 1000X 72/100
Category leader

Bluetti Elite 100 V2 leads here with higher solar input (1,000 W) and faster AC recharge (1 hour).

Bluetti Elite 100 V2 Portable Power Station
Bluetti Elite 100 V2
Trails in This Category
Goal Zero Yeti 1000X Portable Power Station

Goal Zero Yeti 1000X trails here primarily because of lower solar input (600 W).

Buying impact

Elite 100 V2 leads the next-highest model by 23 points here, large enough to matter if this category matches your main use case. It matters most if you cycle the battery often, rely on solar between outages, or need short turnaround between uses.

Outlets, Ports & Connectivity

Bluetti Elite 100 V2 69/100 Goal Zero Yeti 1000X 37/100
Category leader

Bluetti Elite 100 V2 leads here with broader connected controls (WiFi, Bluetooth) and 4 120V AC outlets.

Bluetti Elite 100 V2 Portable Power Station
Bluetti Elite 100 V2
Trails in This Category
Goal Zero Yeti 1000X Portable Power Station

Goal Zero Yeti 1000X trails here primarily because of more limited connected controls (None).

Buying impact

Elite 100 V2 leads the next-highest model by 32 points here, large enough to matter if this category matches your main use case. Use it mainly as a fit check: 240V capability and the specific ports your equipment needs matter more than the raw number of outlets.

Portability & Size

Bluetti Elite 100 V2 77/100 Goal Zero Yeti 1000X 58/100
Category leader

Bluetti Elite 100 V2 leads here with lower weight (25 lb) and smaller overall size (1,049.58 cu in).

Bluetti Elite 100 V2 Portable Power Station
Bluetti Elite 100 V2
Trails in This Category
Goal Zero Yeti 1000X Portable Power Station

Goal Zero Yeti 1000X trails here primarily because of higher weight (31.70 lb).

Buying impact

Elite 100 V2 leads the next-highest model by 19 points here, large enough to matter if this category matches your main use case. Portability matters most for frequent carrying, vehicle use, and tight storage; a mostly stationary backup system can usually give it less weight.

Analysis & specifications

Performance & Capacity

Battery storage, continuous output, service life, and backup-power capability determine how much useful work a power station can support.

Expert analysis

Yeti 1000X can scale to 2,197Wh of total battery capacity versus 1,024Wh for Elite 100 V2, giving it more room to grow into a longer-duration backup system. Elite 100 V2 provides 1,800W of continuous output versus 1,500W for Yeti 1000X. Continuous output is the number to prioritize for sustained appliance loads; advertised peak output matters much less.

Battery Capacity

Bluetti Elite 100 V2 1,024 Wh Best
Goal Zero Yeti 1000X 997 Wh

Stored energy available for running devices and appliances.

Expandable Capacity

Bluetti Elite 100 V2 1,024 Wh
Goal Zero Yeti 1000X 2,197 Wh Best

Maximum battery capacity when supported expansion batteries are added.

Continuous Inverter Power

Bluetti Elite 100 V2 1,800 W Best
Goal Zero Yeti 1000X 1,500 W

Sustained AC output, which is the meaningful figure for ordinary appliance loads.

Advertised Peak Output

Not scored
Bluetti Elite 100 V2 3,600 W
Goal Zero Yeti 1000X 3,000 W

Shown for reference only. Peak claims are not included in Solar Waypoint ratings because they do not reliably describe sustained usable output.

Warranty

Bluetti Elite 100 V2 5 years Best
Goal Zero Yeti 1000X 2 years

Manufacturer warranty coverage for the power station.

Battery Cycles

Bluetti Elite 100 V2 4,000 cycles Best
Goal Zero Yeti 1000X 500 cycles

Published cycle-life figure for long-term battery durability.

Battery Chemistry

Bluetti Elite 100 V2 LiFePO4 (LFP) Best
Goal Zero Yeti 1000X NMC

Battery chemistry affects expected cycle life, weight, and thermal stability.

UPS / EPS Transfer Time

Bluetti Elite 100 V2 10ms Best
Goal Zero Yeti 1000X None

How quickly backup power takes over when grid power is interrupted.

Analysis & specifications

AC & Solar Charging Speeds

Input limits and estimated recharge times show how quickly each battery can be restored from the wall or from solar panels.

Expert analysis

Elite 100 V2 accepts up to 1,000W of solar versus 600W for Yeti 1000X. That gap can materially shorten daytime recovery when you have enough panel capacity and good sun. Elite 100 V2 has an estimated AC recharge time of 1 hour versus 2 hours for Yeti 1000X, a useful advantage when you need quick turnaround between outages or trips.

Maximum AC Input

Bluetti Elite 100 V2 1,200 W Best
Goal Zero Yeti 1000X 600 W

Maximum published charging input from an AC wall source.

Estimated AC Recharge

Bluetti Elite 100 V2 1 hour Best
Goal Zero Yeti 1000X 2 hours

Estimated time to recharge from AC; lower is better.

Maximum Solar Input

Bluetti Elite 100 V2 1,000 W Best
Goal Zero Yeti 1000X 600 W

Maximum solar input accepted by the base power station.

Estimated Solar Recharge

Bluetti Elite 100 V2 1.20 hours
Goal Zero Yeti 1000X 2 hours

Estimated best-case solar recharge time; lower is better.

Analysis & specifications

Outlets, Ports & Connectivity

The outlet mix determines how many devices can be powered directly and how often the less-efficient AC inverter is needed.

Expert analysis

Elite 100 V2 has 4 120V AC outlets versus 2 120V AC outlets for Yeti 1000X. That can reduce the need for a power strip when several AC devices are running at once.

120V AC Outlets

Bluetti Elite 100 V2 4 Best
Goal Zero Yeti 1000X 2

Standard household AC outlets.

USB-A Ports

Bluetti Elite 100 V2 2
Goal Zero Yeti 1000X 2

Direct charging ports for common USB devices.

USB-C Ports

Bluetti Elite 100 V2 2 Best
Goal Zero Yeti 1000X 1

Direct charging for modern phones, tablets, laptops, and other USB-C equipment.

Low-Amp DC Ports

Bluetti Elite 100 V2 3
Goal Zero Yeti 1000X 4

Direct-current outputs for lights, routers, CPAP equipment, and similar devices.

12V Accessory Sockets

Bluetti Elite 100 V2 1
Goal Zero Yeti 1000X 1

Automotive-style sockets for portable refrigerators and other 12V accessories.

App Connectivity

Bluetti Elite 100 V2 WiFi, Bluetooth Best
Goal Zero Yeti 1000X None

Remote monitoring and controls available through the product app or supported connection.

Analysis & specifications

Portability & Size

Weight and overall size show how easily a unit can be carried, stored, and fitted into a vehicle or backup-power setup.

Expert analysis

Elite 100 V2 is 6.7 lb lighter than Yeti 1000X. That is meaningful if you move the station regularly, but much less important for mostly stationary home backup. It is also about 32% smaller by calculated exterior volume than Yeti 1000X, reinforcing its advantage for vehicles and tight storage.

Weight

Bluetti Elite 100 V2 25 lb Best
Goal Zero Yeti 1000X 31.70 lb

Published product weight; lower is easier to move.

Physical Volume

Bluetti Elite 100 V2 1,049.58 cu in Best
Goal Zero Yeti 1000X 1,534.90 cu in

Calculated from the published exterior dimensions; lower takes less storage space.

Dimensions

Not scored
Bluetti Elite 100 V2 12.6 × 8.5 × 9.8 in
Goal Zero Yeti 1000X 15.2 × 10.2 × 9.9 in

Published length, width, and height in inches.

View Full Specifications

Review the complete published specifications, or learn how to interpret power-station specifications.

Specification Bluetti Elite 100 V2 Goal Zero Yeti 1000X
Battery & Power
Battery Capacity 1,024 Wh 997 Wh
Expandable Capacity 1,024 Wh 2,197 Wh
Continuous Inverter Power 1,800 W 1,500 W
Advertised Peak Output 3,600 W 3,000 W
Warranty 5 years 2 years
Battery Cycles 4,000 cycles 500 cycles
Battery Chemistry LiFePO4 (LFP) NMC
UPS / EPS Transfer Time 10ms None
AC & Solar Charging
Maximum AC Input 1,200 W 600 W
Estimated AC Recharge 1 hour 2 hours
Maximum Solar Input 1,000 W 600 W
Estimated Solar Recharge 1.20 hours 2 hours
Solar Input 1
Maximum Watts 1,000 W 600 W
Voltage Range 12–60 V 14–50 V
Maximum Current 20 A 50 A
Connector XT60/XT60i Anderson
Solar Input 2
Maximum Watts — 150 W
Voltage Range — 14–50 V
Maximum Current — 10 A
Connector None DC7909
Outlets, Ports & Connectivity
120V AC Outlets 4 2
USB-A Ports 2 2
USB-C Ports 2 1
Low-Amp DC Ports 3 4
12V Accessory Sockets 1 1
App Connectivity WiFi, Bluetooth None
Physical, Support & Resources
Weight 25 lb 31.70 lb
Weight (Metric) 11.50 kg 14.40 kg
Physical Volume 1,049.58 cu in 1,534.90 cu in
Dimensions 12.6 × 8.5 × 9.8 in 15.2 × 10.2 × 9.9 in
Dimensions (Metric) 320 × 215 × 350 mm 389 × 260 × 250 mm
User Manual Open manual Open manual

Why this comparison is trustworthy

Experience Behind the Ratings

Our team combines many years of solar experience with practical knowledge of portable power, custom battery systems, off-grid design, and the products currently competing for your money.

Real solar and off-grid experience

Our team has worked with power stations since some of the earliest models, along with custom battery, solar, and off-grid system design and builds. We understand what specifications mean once equipment leaves the product page and has to power real loads.

A practical view of the current market

We continually follow new products, changing capabilities, useful features, and common marketing claims. That helps our team recognize what creates real value, what limits a system, and how buyers can make the most of it.

How we turn specifications into useful advice

Solar Waypoint tracks detailed specifications covering battery storage, continuous output, AC and solar charging, battery longevity, outlets, connectivity, and physical design. We standardize those figures so products are evaluated consistently while keeping the specifications visible so readers can see what drives each result.

Matchup Ratings use the capability class represented by the selected products. Larger batteries and stronger continuous inverters receive appropriate credit, while the category results show exactly where each product wins or trails.

More About Our Team

Our experience covers portable power stations, solar charging, custom battery banks, electrical load planning, and complete off-grid system design and builds. That background helps us distinguish a specification that sounds impressive from one that meaningfully improves runtime, charging, reliability, or day-to-day usability.

Power-station expertise begins with the job the system must perform. An experienced team looks beyond a single watt or watt-hour number and considers running loads, startup demands, duty cycles, conversion losses, charging opportunities, storage conditions, and how often the equipment must be moved.

Load and runtime planning

We understand the difference between stored battery energy, usable AC energy, continuous inverter output, and short starting demands. That makes it easier to judge whether a unit is suited to electronics, refrigeration, medical equipment, tools, RV loads, or home-backup essentials—and how long it can reasonably support them.

Charging-system knowledge

A large battery is far less useful when it cannot be replenished in time. We examine AC charging in relation to battery size and evaluate solar watts together with voltage, current, connector, and controller limits. Those details determine which arrays are compatible and how practical off-grid charging will be.

Battery and electrical experience

Battery chemistry, cycle-life claims, warranty coverage, inverter design, outlet types, 120V or 240V capability, DC connections, and backup transfer behavior all affect the way a system can be used. We treat those specifications as parts of one electrical system rather than isolated marketing features.

Selection for real use

The best option changes with the setting. Camping, vehicle travel, job-site use, emergency backup, and expandable home systems place different demands on weight, charging, output, outlets, and accessories. We organize the comparison around those practical tradeoffs.

We also follow product generations, manuals, changing capabilities, accessory ecosystems, and common marketing claims across the market. The goal is not to repeat a product page. It is to explain what the specifications mean together, identify limitations before they become expensive surprises, and help readers choose a system that fits both their present needs and realistic plans for expansion.

Detailed Rating Methodology

Our rating system is designed to answer three practical questions: how much useful work a power station can perform, how effectively it can be recharged, and how convenient it is to connect, move, and live with. The groups are intentionally weighted differently because they do not contribute equally to the core job of providing dependable power.

Performance & Capacity Greatest influence

Storage, continuous output, battery longevity, warranty, and system capability determine which loads the unit can support and for how long.

AC & Solar Charging Major supporting influence

Charging power and estimated recharge time show whether the battery can be restored quickly enough from the wall, solar panels, or a larger system.

Outlets & Connectivity Major supporting influence

The right AC, USB, and DC connections determine whether stored energy can reach the equipment that needs it without unnecessary adapters or conversion losses.

Portability & Size Smaller, use-case influence

Weight and physical size matter, but they are judged in class context so larger batteries are not unfairly penalized simply for containing more hardware.

Why the groups are weighted this way

Performance and capacity receive the most influence because they establish the basic limit of the system: the appliances it can run, the runtime it can provide, and the durability expected from the battery. A light, well-connected product cannot compensate for being unable to support the required load.

Charging and connectivity provide much of the remaining influence. Charging matters because stored energy must be replaced on a useful schedule, especially during outages or off-grid use. Outlets and connectivity matter because power must be delivered in the correct form. Portability remains meaningful, but it carries less influence because every increase in battery capacity and inverter capability normally adds weight and volume.

Peer Ratings compare each model with appropriate standards for its capability class. Matchup Ratings apply the same rating framework to the products selected for a direct comparison. This keeps compact products useful within their intended role while still recognizing the additional capability of larger systems.

  • Continuous output matters. Advertised peak output is shown for reference but receives no rating weight because it does not reliably represent sustained appliance capability.
  • Charging is judged in context. Input wattage is considered together with battery size and estimated recharge time, while solar evaluation also accounts for the limits that determine compatible panel configurations.
  • Useful connections matter more than a long feature list. Common outlets establish everyday flexibility, while specialized 240V, high-amp DC, expansion, and system-level features become important when they change what the compared products can actually do.
  • Class context keeps comparisons fair. Products are measured against realistic expectations for their capability range instead of rewarding size alone or expecting a compact unit to behave like a home-backup system.
  • The evidence stays visible. Category results, strengths and tradeoffs, and the full specification table let readers verify what drives the result.

Ready to choose?

Retailer Options

Build your own matchup

Compare the Models That Matter to You

Choose one model to open its expert analysis, or select two to four models for a complete specification and rating comparison.

Explore the full directory
Build Your Comparison
Best: Bluetti Elite 100 V2